Maintaining The Application And Configuration Files Through The Cli; Maintaining The Access Controller Through Tftp - H3C WX5004 Installation Manual

.............................Done!
10323352 bytes downloaded!
Updating File cfa0:/main.bin
The file is exist,will you overwrite it?
[Y/N]Y..............................................
........................................................................................
........................................................................................
........................................................................................
........................................................................................
........................................................................................
............................................................. ... ......................
....Done!
Step4 Enter 0 to return to the BootWare main menu. Enter 1 on the BootWare main menu to reboot the access
controller.
If the downloaded file has the same name with an existing file on the CF card, the system prompts
The file is exist, will you overwrite it? [Y/N]. If you choose Y, the existing file will be overwritten.
Make sure that sufficient space is available on the CF card. In case of insufficient space, the
system will give a prompt.
The new application file directly replaces the existing file of the same type. In this example, the
downloaded file main.bin replaces the existing application file of type M and becomes the only main
application file.
For details about the application file types, refer to section
Maintaining the Application and Configuration Files Through the
CLI
After the access controller is normally started, you can back up and restore the application and
configuration files through the CLI.

Maintaining the Access Controller Through TFTP

Use the WX5004 as a TFTP client and a file server as the TFTP server. You can use commands on the
configuration terminal, which can be the same file server, to upload the application and configuration
files from the access controller to the file server or download the files from the file server to the access
controller.
Setting up a configuration environment
Set up a network environment (for the procedure, refer to section
Ethernet Interface" on page 5-16). Run the TFTP Server on the file server and set the file path.
"Application
"Upgrading Applications Through an
5-17
Files" on page 5-1.