Installing A Relay Module (Optional) - Bosch NEV 400 LSN Installation Manual

26 en | Installation
4.
4.10

Installing a relay module (optional)

1.
2.
3.
4.
5.
2019-11 | 04 | F.01U.309.346
Fasten the MAP accessory mounting plate EMIL using three
screws (supplied).
Insert the two corner distance bolts (supplied) into the
designated left holes on the upper right side of the MAP
accessory mounting plate EMIL and fasten the screws from
underneath.
Insert the screwable distance bolt (supplied) into the
designated middle hole on the upper right side of the MAP
accessory mounting plate EMIL.
Insert the relay module into the corner distance bolts and
fasten the screw of the distance bolt from above.
Mount the MAP accessory mounting plate EMIL on the MAP
accessory mounting plate and click it into place.
Fasten the MAP accessory mounting plate EMIL using three
screws (supplied).
NEV 400 LSN Power
Bosch Security Systems B.V.
supply