Table of Contents
Advertisement
NEV 400 LSN Power
supply
Figure 5.3: Tamper switch extension piece
2.
Figure 5.4: Installing the tamper switch
3.
4.
For an overview of the cabling, refer to Cabling overview, page
29.
Bosch Security Systems B.V.
Slide the tamper switch onto the rail as shown in the figure
below.
Clip off the connector from the cable of the tamper switch
as shown in the figure below.
Connect the cable of the tamper switch to terminal 43 and
44 of the EMIL expansion module.
Cabling | en
2019-11 | 04 | F.01U.309.346
31
Advertisement
Table of Contents
