Table of Contents
Advertisement
14
en | Installation
4.4
Installing the enclosure
Notice!
Ensure that there is enough free space to the left of the
enclosure so that the enclosure door has full range of motion.
- For a fully opened door, at least 460 mm (18 in) is required.
- For a door opened at 90°, at least 32 mm (1.25 in) is required.
Installing the wall tamper plug
1.
2.
3.
2019-11 | 04 | F.01U.309.346
Use the supplied drill template to mark the holes on the
intended surface.
The drill template can be found in the enclosure box.
If a wall tamper is required, insert the plug for the tamper
switch into the back of the enclosure (required in
accordance with EN50131 grade 3) as shown in the figure
below.
Secure the plug to the wall using a suitable screw (not
supplied).
NEV 400 LSN Power
Bosch Security Systems B.V.
supply
Advertisement
Table of Contents
