Installing The Tamper Switch Rail - Bosch NEV 400 LSN Installation Manual

NEV 400 LSN Power
supply
4.3

Installing the tamper switch rail

1.
2.
3.
Notice!
Do not mount the tamper switch at this time.
Figure 4.2: Installing the tamper switch rail
Bosch Security Systems B.V.
Remove the tamper switch rail from the package.
Mount the tamper switch rail to the inner right side of the
enclosure as shown in the figure below.
Secure the tamper switch rail with the two supplied
screws.
Installation | en
2019-11 | 04 | F.01U.309.346
13