16
en | Installation
Mounting the enclosure
1.
2.
Figure 4.4: Mounting the enclosure
Element
1
2
2019-11 | 04 | F.01U.309.346
Mount the enclosure to the intended surface using suitable
screws and anchors (not supplied). Use the mounting holes
as shown in the figure below.
Ensure that all screws are tight and that the enclosure is
securely fastened to the mounting surface.
Description
Mounting hole
Hole for screw to secure wall tamper plug
NEV 400 LSN Power
1
2
1
Bosch Security Systems B.V.
supply