12
en | Installing the Power Supply Box
2
Installing the Power Supply Box
2.1
Unpacking
This equipment should be unpacked and handled with care. If
an item appears to have been damaged in shipment, notify the
shipper immediately.
Verify that all the parts listed in the product's Parts List below
are included. If any items are missing, notify your Bosch
Security Systems Sales or Customer Service Representative.
The original packing carton is the safest container in which to
transport the unit and must be used if returning the unit for
service. Save it for possible future use.
2.1.1
Parts List
The following table lists the parts included with one of the
following power supply boxes:
Power Supply Box
24 VAC (no transformer) power supply,
NEMA-rated with cover
120 VAC transformer power supply,
NEMA-rated with cover
230 VAC transformer power supply,
NEMA-rated with cover
2.1.2
Optional Parts List
The following table lists the optional equipment for use with
the power supply boxes:
Option
Trim skirt
Replacement power supply box cover
Analog Multimode Fiber Optic Kit
Ethernet Media Converter Kit
Note: The fiber optic kits are mounted inside the power supply
box. Refer to the individual kit for installation instructions.
F.01U.250.895 | 1.0 | 2011.08
Installation Guide
AutoDome Power Supply Boxes
Part Number
VG4-A-PSU0
VG4-A-PSU1
VG4-A-PSU2
Part Number
VGA-A-TSKIRT
VG4-SBOX-COVER
VGA-FIBER-AN
VG4-SFPSCKT
Bosch Security Systems, Inc.