Table of Contents
Advertisement
22
en | Installation
4.7
Installing a 12 V converter (optional)
It is optional to install up to two 12 V converters onto the MAP
accessory mounting plate.
1.
2.
Figure 4.9: Installing the 12 V converter
Cabling a 12 V converter
Danger!
Electricity
Injuries and damage of the system due to wrong polarity and
short circuits are possible.
When connecting wires and cables, ensure to use the correct
polarity.
2019-11 | 04 | F.01U.309.346
Mount one or two 12 V converters onto the MAP accessory
mounting plate as shown in the figure below.
Secure each 12 V converter with an M 3.5 x 5 mm screw
(not supplied).
NEV 400 LSN Power
Bosch Security Systems B.V.
supply
Advertisement
Table of Contents
