What This Appendix
Contains
Understand Data,
Connection, and
Communication Formats
1
Configure Modules in RSLogix 5000 Software
Read this appendix for information about how to configure your
modules in RSLogix 5000 software, including how to complete entries
on these dialogs.
• Fault/Program Action
• Counter Configuration
• Output Configuration
Before you configure your modules, note the following about Data
formats and Connection types.
• Data format type is Integer.
• Connection types are as follows.
• Data
• Listen Only
Communication formats for adapters are as follows.
• Listen Only - Rack Optimization
• None
• Rack Optimization
Choices for formats for the module depend on the Communication
format for the adapter. See the table for a listing of possible module
Connection formats based on adapter Communication formats.
Adapter Communication Formats
Listen Only - Rack Optimization
None
Rack Optimization
Appendix
Possible Module Connection Formats
Data (default)
Listen Only
Data (default)
Listen Only
Data (default)
Listen Only
Publication 1734-UM003B-EN-P - August 2005
A