Component Replacement; Replacing Cable - Bosch HTD 6 Series Service Manual

9.

Component replacement

9.1

Replacing cable

1. Loosen the two screws on the underside to unfasten
the light box from the slide shoe.
Fig. 25: Underside of light box
1 Fastening screws
!
Secure the counterweight with a locking bolt before
tilting the post.
2. Place a sheet of paper or a large cloth on the floor to
avoid damaging the post.
3. Carefully lay the post on the floor.
Robert Bosch GmbH
Component replacement | HTD 6xx / HTD 8xx | 79
4. Loosen but do not as yet remove the retaining
screws on the side of the laser visor.
5. Remove the screws at the top of the post.
6. Remove the laser visor together with the post cover.
en
|
1 692 106 011 2019-03-26