en
74 | HTD 6xx / HTD 8xx | Firmware update
6.2
HTD 8xx
!
This function is only to be executed if new firmware
(FW) is available. The system could be damaged if
use is made of a USB stick not containing FW.
i
The firmware can be downloaded from the "Soft-
ware-Center" at "http://www.beissbarth.com".
1. Click on "OPTIONS" in the Start menu.
2. Click on "FW" in the "OPTIONS" screen.
3. Insert the USB stick with the new firmware in the
USB interface on the side of the light box.
|
1 692 106 011
2019-03-26
4. Click on "UPDATE" and wait for completion of up-
dating.
5. Remove the USB stick.
6. Confirm with
.
"
The
device
firmware
The "OPTIONS" screen appears.
has
been
updated.
Robert Bosch GmbH