Table of Contents
Advertisement
26/32
Demounting and replacement
Bosch Rexroth AG, VT-PDFE-1X...; RE 29689-B/11.2019
11 Demounting and replacement
11.1 Required tools
No special tools are required for demounting.
11.2 Preparing demounting
Risk of injury by demounting parts under pressure and electric voltage!
If you do not de-pressurize and de-energize the system before starting
demounting, you may get injured and the product or system parts may be
damaged!
▶
Decommission the entire system as described in the general instructions for
the system.
▶
The system and all connected components must be brought to a safe state. In
addition, the components must be switched off, de-pressurized, de-energized
and secured against restarting.
11.3 Preparations for storage and further use
To prepare the test device for storage and further use, proceed as follows:
▶
Store the test device in the original packaging.
▶
Protect against dust and humidity.
12 Disposal
12.1 Environmental protection
Careless disposal of the test device may cause environmental pollution.
▶
Dispose of the product therefore in accordance with the currently applicable
national provisions in your country.
▶
Please observe the following information for the environmentally friendly
disposal of the test device.
WARNING
Advertisement
Table of Contents
