Symbols Used 51 10. Electrical Connections - Htd 6Xx; In The Documentation; Meaning; Symbols In This Documentation - Bosch HTD 6 Series Service Manual

1. Symbols used
1.1

In the documentation

1.1.1 Warning notices - Structure and meaning
Warning notices warn of dangers to the user or people
in the vicinity. Warning notices also indicate the con-
sequences of the hazard as well as preventive action.
Warning notices have the following structure:
KEY WORD – Nature and source of hazard!
Warning
Consequences of hazard in the event of failu-
symbol
re to observe action and information given.
€
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observance:
Key word Probability of
occurrence
DANGER Immediate impen-
ding danger
WARNING Possible impending
danger
CAUTION Possible dangerous
situation
1.1.2

Symbols in this documentation

Symbol Designation Explanation
Attention Warns about possible property damage.
!
Information Practical hints and other
i
useful information.
1. Multi-step Instruction consisting of several steps.
2. operation
One-step Instruction consisting of one step.
e
operation
Intermediate An instruction produces a visible inter-
«
result mediate result.
Final result There is a visible final result on com-
"
pletion of the instruction.
Robert Bosch GmbH
Severity of danger if inst-
ructions not observed
Death or severe injury
Death or severe injury
Minor injury
Symbols used | HTD 6xx / HTD 8xx | 51
1.2

On the product

!
Observe all warning notices on products and ensure
they remain legible.
CAUTION
LASER
3R
IEC/EN 60825-1:2014
P o = 5 m W ; λ = 6 3 5 n m
Fig. 1: Alignment laser label
!
Laser radiation, do not look at directly with optical
instruments laser class 1M.
Take note of warning in section 2.1.
en
|
1 692 106 011 2019-03-26