Service; Cleaning; Kts 350; Data Carrier - Bosch KTS 3a Series Original Instructions Manual

System tester for control unit diagnosis
Hide thumbs Also See for KTS 3a Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 15
6.

Service

6.1

Cleaning

6.1.1

KTS 350

Only use a soft cloth and neutral detergents to clean
the housing and display of the KTS 350. Do not use
abrasive cleaning agents and coarse workshop cloths!
6.1.2

Data carrier

Clean the CD-ROM or DVD-ROM with a disk cleaning kit
or carefully wipe over the silver side of the disk with a
soft, lint-free cotton cloth. Never use paper towels, as
these could cause scratches.
6.1.3

DVD drive

Clean the DVD drive at regular intervals with a cleaning
disk for the CD-ROM or DVD drive. The appropriate
cleaning disks are available from most computer or
entertainment electronics shops.
6.2

Spare and wearing parts

!
Because of license-related reasons, the recovery
DVD ROMs differ depending on the Windows version
installed. Installing a recovery DVD ROM that differs
from the Windows version installed is not allowed.
i
The Windows version installed can be found under
"Start >> Control Panel >> System and Security >>
System" in the "Windows Edition" area.
Denomination
KTS 350 tablet PC (green)
KTS 350 tablet PC (anthracite)
OBD connection cable, 1.8 m
Storage battery
<)
Power supply unit
Power supply cable
Stylus (3x)
<)
Recovery DVD
Windows 10 Enterprise 2015 LTSB
Recovery DVD
Windows 10 Enterprise 2016 LTSB
Wearing part
<)
Robert Bosch GmbH
6.3
1. Switch off the KTS 350.
2. Loosen the storage battery screws on the back of
the KTS 350 (see Fig. 3, item 3).
3. Remove the storage battery.
4. Insert the new storage battery in the storage-battery
compartment and secure by means of the two
screws on the storage battery (see fig. 3, item 3).
5. Switch on KTS 350.
i
The storage battery charge indicator can be called
up using the
"
Order number
The storage battery charge indicator shows the current
1 687 023 795
battery charge on a scale of 0 to 100 %.
1 687 023 796
i
1 684 465 756
It is advisable to charge the storage battery for at
1 687 335 042
least three hours before running the KTS 350 off the
1 687 023 697
battery.
1 684 461 186
1 687 010 403
1 687 005 122
1 687 005 134
Service | KTS 350 (KTS 3a Series) | 23

Storage battery replacement

WARNING - Risk of explosion when
charging storage battery!
Risk of explosion and hence burns and injury
in the event of improper charging of the
storage battery!
Only use the storage battery specified for
the KTS 350.
Only use the power supply unit specified
for the KTS 350.
Heed the notes on disposal.
Storage batteries are not to be heated,
burnt, short-circuited, mechanically
damaged or charged with excessively high
currents or reverse polarity!
Suitable extinguishing agents: water, CO
sand.
icon.
1 689 989 293
en
,
2
|
2018-03-24

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kts 350

Table of Contents