Software Installation - Keysight M9383A Startup Manual

Software Installation

Install the software in the order indicated in the following table into the embedded
controller, or PC if your configuration contains an M9021A PXIe cable interface.
Restart your controller when prompted by the respective software installer.
Order Software
1 *
2 *
3
* The software is already installed on instrument configurations that include the
M9037A embedded controller.
Keysight M9383A PXIe Vector Signal Generator
If you are using a remote controller, use this sequence to restart the PC and
chassis:
1) Shut down the PC. 2) Power down the chassis. 3) Power up the chassis. 4)
Power up the PC.
Keysight IO Libraries Suite version 17.2 Update 1 (version 17.2.20407.1)
or newer; includes Keysight Connection Expert
M9018B/M9019A 18 Slot PXIe Chassis Drivers
M9383A PXIe Vector Signal Generator
The Keysight Instrument Control DVD, which includes the IO Libraries Suite
software, is no longer shipped with Keysight instruments. If you require a
Keysight Instrument Control DVD, it can be ordered by contacting your local
Keysight Customer Contact Center.
Install from...
www.keysight.com/find
/iosuite
www.keysight.com/find
/M9018B
www.keysight.com/find
/M9019A
www.keysight.com/find
/M9383A-driver
66