Chassis Triggers - Keysight M9383A Startup Manual

Chassis Triggers

The Keysight M9383A source supports the following triggering modes for starting
modulation and/or lists.
Immediate (Default) Modulation begins as soon as the Vector Modulator is ready.
Software
Triggering
External
Triggering
ft Front Panel
81
The source will begin modulating when a software trigger is called via the API. In the
implementation a User Command is attached to the Vector Modulator FPGA to cause state
transition from armed to triggered.
The Digitizer FPGA state synchronization for triggering an acquisition can be attached to any of
the front panel or PXI backplane triggers.
You must set up the PXI chassis trigger lines to enable the M9383A trigger
routing feature for backplane triggers crossing chassis segments. For more
information about backplane triggers, refer to
M9383A PXIe Vector Signal Generator Soft Front Panel Help.
Managing Triggers
Keysight M9383A PXIe Vector Signal Generator
chapter in the