Quick Start; Unpack, Inspect, And Verify Shipment; Unpack And Inspect The Modules; Inspect For Damage - Keysight M9383A Startup Manual

Quick Start

Unpack, Inspect, and Verify Shipment

Unpack and Inspect the Modules

The modules arrive packed in one small box. Before unpacking your module(s),
inspect the packaging container for evidence of mishandling during transit. Inspect
the carton carefully for damages or signs of rough handling.
Remove the module(s) from the packaging container and ensure that all
accessories are included. Inspect the module(s) and accessories for damage. If the
contents appear damaged, notify your local Keysight Technologies Inc.
representative.

Inspect for Damage

After unpacking an instrument, inspect it for any shipping damage. Report any
damage to the shipping agent immediately, as such damage is not covered by the
warranty (see warranty information at beginning of this document).
If the shipping materials are damaged or the contents of the container are
incomplete:
11
Unpack, Inspect, and Verify Shipment
Install the PXIe Modules
Install the Software
Verify Operation of the Keysight M9383A PXIe Vector Signal Generator
Generate and View an Output Signal
The modules are shipped in materials which prevent damage from static. The
module should only be removed from the packaging in an anti-static area
ensuring that correct anti-static precautions are taken. Store all modules in
anti-static envelopes when not in use.
Contact the nearest Keysight Technologies office.
Keep the shipping materials for the carrier's inspection.
If you must return the M9383A VSG to Keysight Technologies, use the
original (or comparable) shipping materials. Refer to
for Service .
To avoid damage when handling a module, do not touch exposed connector
pins.
See www.keysight.com/find/tips
Keysight equipment.
Return an Instrument
for information on preventing damage to your
Keysight M9383A PXIe Vector Signal Generator