•
Configuring PoE port power detection control
•
Configuring PoE port type
Enabling and disabling PoE port power administration
Enable the PoE power administration on 8348TX-PWR or 8348GTX-PWR ports for the flow of
required power.
Prerequisites
You must log on to the Interface configuration mode in the ACLI.
Procedure steps
1. Enable the PoE power administration on the ports by using the following command:
2. Disable the PoE power administration on PoE ports by using the following
Configuring the PoE port priority for power allocation
Configure the PoE port priority for power allocation on the Avaya Ethernet Routing Switch
8300.
Prerequisites
You must log on to the Interface Configuration mode in the ACLI.
Procedure steps
Configure the PoE port priority for power allocation by using the following command:
poe priority port<portlist>
Important:
This command identifies which port has the highest priority for power allocation. Whenever
you power cycle a PoE card or re-enable it administratively, the port with the highest priority
Configuration — Power over Ethernet
on page 57
no poe shutdown port<portlist>
command:
poe shutdown port<portlist>
Enabling and disabling PoE port power administration
on page 57
May 2011
55