PoE configuration example reference using the CLI
Figure 2: PoE configuration example
Important:
Beforeyou configure PoE, disable and enable PoE power administration. See
enabling the PoE power administration
PoE configuration on the Ethernet Routing Switch 8300 navigation
•
Disabling and enabling the PoE power administration
•
Configuring PoE
•
Changing configuration
Disabling and enabling the PoE power administration
Disable and enable the PoE power administration to configure PoE on Ethernet Routing Switch
8300.
Procedure steps
1. Disable PoE power administration for each slot (for example, slot 7) by using the
60
Configuration — Power over Ethernet
on page 61
on page 63
following command:
ERS-8310#
config poe card 7 admin disable
on page 60.
on page 60
Disabling and
May 2011