Titan SF2843 Safety And Operating Manual page 6

may cause irritation or burns.
6. Service
a. Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power tool
is maintained.
HEALTH ADVICE
WARNING! When drilling, sanding, sawing or grinding, dust particles will be
produced. In some instances, depending on the materials you are working with,
this dust can be particularly harmful to you (e.g. lead from old gloss paint).
You are advised to consider the risks associated with the materials you are working
with and to reduce the risk of exposure.You should:
- Work in a well-ventilated area.
-Work with approved safety equipment, such as those dust masks that are specially
designed to filter microscopic particles.
ADDITIONAL SAFETY INSTRUCTIONS FOR CORDLESS
JIGSAW
1. Remove the battery pack from the machine before carrying out any adjustment,
servicing or maintenance.
2.Your charger is double insulated for additional protection against a possible electrical
insulation failure within the tool.
3. Always check walls, floors and ceilings to avoid hidden power cables and pipes.
4. After long working periods external metal parts and accessories could be hot.
5. Wear eye protection when operating this tool.
6.Your cordless saw is a hand held tool, do not clamp your cordless saw.
7. Do not dispose of batteries. Return exhausted batteries to your local collection or
recycling point.
8. Remove the battery pack from the saw before carrying out adjustments.
9. Do not expose to rain or water.
10. Charger is for indoor use only.
11. Do not store the battery pack in temperatures over 40
12. Always charge the battery pack between temperatures 0
temperature is 15
o
13. Only use the charger and the battery pack provided, no others.
14. Avoid short circuit of the battery pack connections (screws & nails).
15. Do not incinerate or burn the battery pack, it may explode.
16. Do not charge a damaged battery pack.
17. Replace any damaged supply cords on your charger in an approved service centre.
18. Always disconnect the charger power supply before making or breaking the
connections to the battery pack.
19. Battery pack and charger will be warm during charging, this is normal.
20.Your saw and battery pack will be warm when working, this is normal.
21. When not in use, remove a charged battery pack from the charger.
22. Always remove the battery pack from the charger immediately after re-charging is
SF2843 CSJ18P-M-060419.indd 6
C-25 C.
o
C.
o
C to 30 C. Ideal charging
o o
2006-5-25 16:38:11