Table of Contents
Advertisement
Installation Procedure for the Upgrade
"Step 23. Install Cables on the A19 Test Set Motherboard."
"Step 24. Replace the Front Panel's Lower Dress Panel."
"Step 25. Reinstall Front Panel Assembly."
"Step 26. Install the Overlay."
"Step 27. Install the Front Panel Jumper Cables."
"Step 28. Position the Cables and Wires to Prevent Pinching."
"Step 29. Reinstall the Inner Cover."
"Step 30. Reinstall the Outer Cover."
"Step 31. Remove Option 219 License."
"Step 32. Enable Options 419."
"Step 33. Perform Post-Upgrade Adjustments and Calibration."
"Step 34. Prepare the PNA for the User."
Step 1. Obtain a Keyword and Verify the Information
Follow the instructions on the Software Entitlement Certificate supplied to
obtain a license key file for installation of this upgrade. Refer to
Redemption" on page
Verify that the model number, serial number, and option number information
on the license key match those of the instrument on which this upgrade will be
installed.
If the model number, serial number, or option number do not match those on
your license key, you will not be able to install the option. If this is the case,
contact Keysight for assistance before beginning the installation of this
upgrade. Refer to
Once the license key file has been received and the information verified, you
can proceed with the installation at
page
Step 2. Remove the Outer Cover
For instructions, click the Chapter 7 bookmark "Removing the Covers" in the
PDF Service Guide.
Installation Note N5222-90119
5.
"Contacting Keysight" on page
13.
If the model number, serial number, or option number do not match those
on your license key file, you will not be able to install the option. If this is
the case, contact Keysight for assistance before beginning the installation
of this upgrade. Refer to
"Step 2. Remove the Outer Cover" on
"Contacting Keysight" on page
"License Key
4.
4.
13
Advertisement
Table of Contents
