Table of Contents
Advertisement
Installation Procedure for the Upgrade
Figure 14
Location of Cable Clamps to Secure W49
—
30
* As shown in
Figure
14, install two cable clamps (part number 1400-1334)
to secure W49 (part number N5222-20024).
W48 (N5222-20101) A33 reference mixer switch to A23 mixer brick (R1)
* As shown in
Figure 15 on page
1400-0249) to secure W48 (part number N5222-20101).
31, install three cable ties (part number
Installation Note N5222-90119
Advertisement
Table of Contents
