Cochlear Nucleus Freedom Bodyworn User Manual page 51

�
Monitor earphones cannot be used with the Mini BTE
Controller.
To use the monitor earphones:
1. Make sure your processor is turned on.
2. Lift the socket cover and push the monitor earphone plug
into the accessory socket at the base of the BTE Controller or
Bodyworn/Babyworn Controller shoe. Do not try to force the
plug into the socket.
Plugging the monitor earphone plug into the accessory socket
3. If you wish to test an accessory, plug it into the monitor
earphone connector.
Testing an assessory with the monitor earphones
4. Press both the Increase and Decrease buttons for a few seconds
to activate the earphones.
© Cochlear Limited 2014 Nucleus Freedom User Manual - 51