Wearing Your Processor; Positioning Your Processor And Coil - Cochlear Nucleus Freedom Bodyworn User Manual

Wearing your processor

System diagrams of the different wearing options can be found in
Overview of your processor components. They provide a good
reference on how to assemble your processor
For information on wearing the Babyworn, see Wearing the Babyworn
at the end of this chapter.

Positioning your processor and coil

Your processor is contoured to fit neatly and comfortably behind the
ear. A magnet holds the coil in place over the implant.
You may find it easier to turn your processor on before placing it on
your ear. To turn on your processor push and hold the Select button
for a few seconds, until you either hear sounds (if your processor is in
place on your head), or the active program (P1, P2, P3 or P4) shows
on the display.
To place your processor on your ear:
1. Place the earhook over your ear while simultaneously holding
the coil in either of your hands. Do not let the coil hang freely as
the strain can damage the cable.
2. Place the coil on your head; the magnet should hold it in place
over your implant.
© Cochlear Limited 2014
Correctly positioned processor
Nucleus Freedom User Manual - 11