Cochlear Nucleus Freedom Bodyworn User Manual page 48

Plugging an accessory into the accessory socket
3. Push both the Increase and Decrease buttons at the same
time for a few seconds to activate the accessory. EA (External
Accessory) shows briefly on the display while the change is
happening.
EA flashes briefly when External Accessory (EA) is activated
A short tone (if the private or public tone is turned on in that
program) confirms the accessory's connection. (The tone also sounds
when the accessory is disconnected.)
Press either the Increase or Decrease button to adjust the sound
level. If the Increase or Decrease is not pressed again within a short
time, the display will go back to the program display.
An X on the Bodyworn Controller display shows the accessory has
been activated.
Accessory activated (X) on Bodyworn Controller
To stop using the accessory, remove it from either the base of the
BTE Controller or the Bodyworn/Babyworn Cable Shoe.
48 - Nucleus Freedom User Manual © Cochlear Limited 2014