Cochlear Nucleus Freedom Bodyworn User Manual page 21

Babyworn wearing option with Snugfit Retention Case
It is recommended to use the Snugfit Retention Aid to hold the
Processing Unit when using the Babyworn wearing option.
The Mini BTE Controller is not compatible with the Babyworn
wearing option as it does not fit into the Babyworn Retention Case.
See Overview of your processor components for a system diagram of the
Babyworn wearing option.
Attaching the Processing Unit to the BTE
Controller with the Babyworn Cable
Attach the Processing Unit to the BTE Controller, with the Babyworn
Cable, before using the Babyworn Retention Case:
1. Separate the Processing Unit from the BTE, Mini BTE or
Bodyworn Cable if attached.
2. Hold the Babyworn Cable Shoe and the Processing Unit so they
touch. The shoe should face to the left and the Processing Unit
to the right of the final position.
3. Twist the shoe and the Processing Unit until the two parts fit
into place.
© Cochlear Limited 2014 Nucleus Freedom User Manual - 21