Download Print this page
Cochlear Nucleus Kanso Pairing & Streaming

Cochlear Nucleus Kanso Pairing & Streaming

Wireless pairing & streaming with resound
Hide thumbs Also See for Nucleus Kanso:

Advertisement

Quick Links

Cochlear
Nucleus
Kanso
and ReSound
®
Wireless Pairing & Streaming
Microphones
Note: When bimodal pairing, first ensure hearing devices are programmed to opposite ears.
1
Turn off ReSound Hearing Aid
and Kanso Sound Processor
Press and hold Kanso button
until the light is a steady orange.
TV Streamers
1
Plug power and audio cables
into TV Streamer and connect
to audio source
Microphones and TV Streamers
1
2
Turn on ReSound
Turn on
Hearing Aid then
microphone
Kanso Sound Processor
or turn on TV
Press the Kanso
button to turn on.
2
Turn on microphone
Note: Ensure microphone is fully charged.
Switch on.
2
Turn off ReSound Hearing Aid
and Kanso Sound Processer
Press and hold Kanso button
until the light is a steady orange.
OPTION
A
Kanso Sound
Processor
Press and hold button
for 2 seconds then
Streaming
release to stream audio.
to one or
both hearing
Note: Press and release again if you need to cycle to the next audio source. This is
devices
necessary if your audiologist enabled the Telecoil as this is the first streaming audio source.
Note: Streaming
OPTION
A
must be started and
Press and hold the push
stopped on each
button on your ReSound
device individually.
Hearing Aid for 3 seconds
3
Locate and press the round
pairing button on back by
the clip
Note: The LED will flash
yellow while device is in
pairing mode for 20 seconds.
3
Press pairing button
Note: The LED will flash
yellow while device is in
pairing mode for 20 seconds.
OPTION
B
CR210 Remote
Control
Long-press the Telecoil button.
Audio will start streaming
through the microphone.
OPTION
B
If you have a ReSound Unite
Control (optional), simply press the
streaming button on this Remote Control.
Maximize your hearing with both ears
4
Turn on ReSound Hearing Aid,
pause 2 seconds, then turn on
20
Kanso Sound Processor
seconds
4
Turn on ReSound Hearing Aid,
pause 2 seconds, then turn on
20
Kanso Sound Processor
seconds
OPTION
C
Using CR230
Remote
Assistant
Long-press the
Telecoil button.
Using ReSound
Unite Remote
Remote
1
Wolfe, Jace. "Why Two Are Better Than One." Presented at ACIA 2014, Nashville, TN.
1
Press the Kanso
button to turn on.
Press the Kanso
button to turn on.

Advertisement

loading

Summary of Contents for Cochlear Nucleus Kanso

  • Page 1 Cochlear Nucleus Kanso and ReSound ™ ® ™ Wireless Pairing & Streaming Maximize your hearing with both ears Microphones Note: When bimodal pairing, first ensure hearing devices are programmed to opposite ears. Turn off ReSound Hearing Aid Turn on microphone...
  • Page 2 You hear the audio streaming from the device. During a call: ©Cochlear Limited 2016. All rights reserved. Hear now. And always and other To stop streaming, stop playing music on the device. To transfer a call started on your phone to the phone trademarks and registered trademarks are the property of Cochlear Limited or Cochlear Bone Anchored Solutions AB.