Reproducible Setting Of The Nozzle Position - WAGNER PEA-C4-HiCoat Assembly And Operating Manual

Preparing the spray gun
3.4

Reproducible setting of the nozzle position

12
•
For a horizontal powder cloud, the fan spray nozzle
is set where the protective wedge is in the 0°
position.
It is possible to set it other positions for special applica-
tions.
On the nozzle body and electrode holders there are X
X
markings. In 15° steps, the position can be changed if
necessary and reproducibly.
peac4_em_0015
The outer nut has to be removed for exact positioning.
An adjustment tool is provided for the fan spray
nozzle.
It permits turning the fan spray nozzle without
damaging the electrodes and without removing the
outer nut.
The outer nut only has to be slackened.
Peac4_0014
0390860 – PEA-C4-HiCoat-Enamel
0205_Einstellg_duesenposit_em.doc
05/2007