Safety Regulations; Safety Hints - WAGNER PEA-C4-HiCoat Assembly And Operating Manual

Safety regulations

2. Safety regulations
2.1

Safety hints

Warning
This equipment can be dangerous if it is not operated in accordance with
this operating manual!
There might be additional regulations to be observed, put into effect by
governmental, state or other official agencies or local security (fire)
departments!
Warning
Under no circumstance may persons with a cardiac pacemaker come close
to the area between the tip of the spray gun and the work piece to be
coated!
The following rules must be observed in order to ensure a safe and efficient use of the
equipment:
• The user has to observe particularly the safety
guidelines of the VdS, the local professional and
security institutions.
• The electrostatic coating equipment may only be
operated by trained and qualified personnel.
• The spray gun may only be operated in powder
coating booths or on powder coating stands that
are equipped with a ventilation system.
• Over sprayed powder must be reliably collected.
• Adhere to the instructions given by the manufac-
turers and to the prevalent local laws on the
environment when disposing of waste coating
powder.
• The main power connection for operation of the
Wagner powder equipment must be electrically
interlocked with the exhaust system of the
powder coating booth.
6
• In the event of faults or defects, repair work is to
• Repairs may only be carried out by trained
• The work area must have an electrostatically
• All conductive parts in the work area must be
• All persons inside the work area must wear elec-
• Spray guns should be operated with bare hands!
0390860 – PEA-C4-HiCoat-Enamel
be performed at the user's discretion.
technicians.
conductive floor. (measured in accordance with
EN 1081)
electrostatically grounded. (work area = 1 m
around every spray location or opening in the
booth)
trostatically conductive footwear.
If gloves are used they must be made of
conductive material.
010101_Sicherheit01_pea_em.doc
05/2007