Replacing The Heater Gartridge; Items Needed - Nordson AD-31 Series Product Manual

7-6
Repair
oo
so
so
4203053
Thermostat Replacement
Fig.
7-9
Connecting
the Thermostat
Wires
4.
Replacing
the Heater
Cartridge
Items Needed
7.
Discard the thermostat and install the replacement thermostat.
8.
Connect the thermostat wires to the terminal block.
9.
Replace
the pivot sleeve shells. lnsert and tighten the screws holding
the shells together.
10.
Restore the system to normal operation
by
following the startup
instructions
in
your applicator product manual.
WARNING:
Allow only
qualified personnelto perform the
following
tasks.
Read and follow the safety instructions
in
this
document and all other related documentation.
WARNING:
Hot! Risk of
burns. Wear long-sleeved,
heat-protective clothing;
safety goggles; and heat-protective
gloves.
o
appropriate protective clothing
'
3-mm ltls-in.1flat-bladescrewdriver
.
3-mm (1/8-in.)
Phillips
screwdriver
o
replacement heater
cartridge (for a part number, refer
to
Parts,
section
8)
ATEN{8-[AD-31EXl-l
42-72
lssued 10/95
O
1995
Nordson
Corporation
All
rights reserved