300M Wireless AP
1. Security Mode: Supports WPA-PSK, WPA2-PSK and WPA/WPA2-PSK Mixed.
WPA-PSK: Supports AES and TKIP cipher types.
WPA2-PSK: Supports AES, TKIP and TKIP+AES cipher types.
WPA/WPA2-PSK mixed: If selected, both WPA-PSK and WPA2-PSK secured wireless clients can join your
wireless network.
2. Cipher Type: Includes AES, TKIP and TKIP&AES.
AES: If selected, wireless speed can reach up to 300Mbps.
TKIP: If selected, wireless speed can reach up to 54Mbps.
TKIP+AES: If selected, both AES and TKIP enabled wireless clients can join your wireless network.
3. Key: Specify the security key.
3.5.2 Radio
Click Wireless > Radio to enter screen below. Here you can configure basic wireless settings including
network mode, channel, extension channel, channel bandwidth, etc.
1. Enable Wireless: Check/uncheck to enable/disable the wireless feature.
2. Network Mode: Select a right mode according to your wireless client. The default mode is 11b/g/n mixed.
11b mode: Select it if you have only 11b wireless devices in your wireless network. Up to 11Mbps wireless
rate is supported in this mode.
11g mode: Select it if you have only 11g wireless devices in your wireless network. Up to 54Mbps wireless
rate is supported in this mode.
21