Epson SC-F9400H Series Operator's Manual page 18

SC-F9400H Series/SC-F9400 Series Operator's Guide
G
To ensure that the roll core holder is sufficiently
inserted into the roll core, push the top of the roll
core holder towards the end of the roll two times.
Confirm that the roll core and edges of the media
are not misaligned.
H
While pressing from the top of the left-side roll
core holder, tighten the fixing screw.
Tighten it so the roll core holder does not move.
Basic Operations
I
Rotate the handle until part A in the illustration
below is fully inserted.
c
Important:
Once part A is hidden, do not turn the handle
any further. Pressing too hard may damage the
roll core holder.
If part A is still visible even after the handle has
been turned fully, the roll core holder may not
be fully inserted. Return to step 6.
18