Removing Media - Epson SC-F9400H Series Operator's Manual

SC-F9400H Series/SC-F9400 Series Operator's Guide
c
Important:
When you cut the media, check that it does not
rise up inside the front cover or has not come
free from the media edge plate before printing.
D
Take up the cut media completely by operating
the Manual switch according to how the media is
rolled.

Removing Media

Caution:
❏ If the media weighs over 20 kg, it should not be
carried by one person. When loading or
removing the media, use at least two people.
❏ Follow the instructions in the manual when
loading media or roll cores or removing the
take-up roll.
Dropping media, roll cores, or take-up rolls
could result in injury.
Basic Operations
A
Rotate the handle of the left-side roll core holder.
B
To prevent the media from sliding off the roll,
support the roll at its left end.
C
Loosen the left roll core holder fixing screw and
remove the roll core holder from the roll.
D
Lower the roll onto the roll support.
E
To prevent the media from sliding off the roll,
support the roll at its right end.
26