Daily Cleaning - Epson SC-F9400H Series Operator's Manual

SC-F9400H Series/SC-F9400 Series Operator's Guide
Caution:
❏ Store ink packs, ink cleaner, grease, and waste
ink in a location out of the reach of children.
❏ During maintenance, wear protective clothing,
including protective eyewear, gloves, and a
mask.
If ink, waste ink, ink cleaner, or grease contact
your skin or enter your eyes or mouth, take the
following actions:
❏ If fluid adheres to your skin, immediately
wash it off using large volumes of soapy
water. Consult a physician if the skin
appears irritated or is discolored.
❏ If fluid enters your eyes, rinse immediately
with water. Failure to observe this
precaution could result in bloodshot eyes or
mild inflammation. If problems persist,
consult with a physician.
❏ If fluid enters your mouth, consult a
physician immediately.
❏ If fluid is swallowed, do not force the person
to vomit, and consult with a physician
immediately. If the person is forced to
vomit, fluid may get caught in the trachea
which can be dangerous.
❏ Do not drink the ink.
❏ Remove the media from the printer before
proceeding with cleaning or replacing the head
cleaning set.
❏ Never touch the belts, circuit boards, or any parts
that do not require cleaning. Failure to observe this
precaution could result in malfunction or reduced
print quality.
❏ Use only the supplied cleaning sticks or sticks
contained in a maintenance kit. Other types of
sticks that produce lint will damage the print head.
❏ Always use fresh cleaning sticks. Re-using sticks
can make stains even harder to remove.
❏ Do not touch the tips of the cleaning sticks. Oil from
your hands could damage the print head.
❏ Do not use anything other than the specified ink
cleaner when cleaning around the print head, caps,
etc. Using anything else could result in malfunction
or reduced print quality.
Maintenance
❏ Touch a metallic object before starting work to
discharge any static electricity.

Daily Cleaning

When lint, dust, or ink adheres to the platen or the
media edge plates, it could cause clogged nozzles or ink
drops to occur.
To maintain optimum printing quality, we recommend
cleaning before starting work every day.
Caution:
❏ The heater may be hot; observe all necessary
precautions. Failure to observe the necessary
precautions could result in burns.
❏ Be careful not to trap your hands or fingers
when opening or closing the front cover. Failure
to observe this precaution could result in
injury.
c
Important:
Do not use ink cleaner when cleaning the platen or
media holding plates. Failure to observe this
precaution could result in damaged parts.
A
Make sure the printer is turned off and the screen
has turned off, and then unplug the power cable
from the outlet.
Disconnect both of the power cables.
B
Wait for one minute after unplugging the power
plug.
C
Open the front cover.
32