SC-F9400H Series/SC-F9400 Series Operator's Guide
When to perform
❏
When checking if nozzles are clogged
❏
When checking which colors are
clogged
❏
Horizontal stripes or tint unevenness
(banding) are appeared.
When a clog is found after checking for
clogged nozzles
When it has become difficult to see inside
the ink tanks because of dirt on the heat
shield
When a greasing message is displayed on
the control panel
Maintenance
Operation
Checking for clogged nozzles
Head Cleaning
Clean the heat shield
Applying the supplied grease to the carriage rod
30