Table of Contents
Advertisement
SC-F9300 Series
User's Guide
C
Set the Auto switch to Off. Take up the cut media
completely by operating the Manual switch
according to how the media is rolled.
Removing Media
Caution:
❏ If the media weighs over 20 kg, it should not be
carried by one person. When loading or
removing the media, use at least two people.
❏ Follow the instructions in the manual when
loading media or roll cores or removing the
take-up roll.
Dropping media, roll cores, or take-up rolls
could result in injury.
A
Rotate the handle of the left-side roll core holder.
B
To prevent the media from sliding off the roll,
support the roll at its left end.
Basic Operations
C
Loosen the left roll core holder fixing screw and
remove the roll core holder from the roll.
D
Lower the roll onto the roll support.
E
To prevent the media from sliding off the roll,
support the roll at its right end.
F
Loosen the right roll core holder fixing screw and
remove the roll core holder from the roll.
G
Lower the roll onto the roll support.
H
To remove media from the rear media feeding
unit, reverse the steps you followed to load it.
44
Advertisement
Table of Contents
