How To Handle Failure Messages; How To Handle Power Interuptions - Maytag MFS Series Programming Manual

6.13. HOW TO HANDLE FAILURE MESSAGES

When a failure has been detected by the MCG Wash Computer, a failure message is
generated, to inform the operator about the problem.
XX
YY
UNLOAD
D ZZZ
Fault Message
Safety conditions
If there is still water in the drum or if the temperature is too high, it's not possible to open the door.
The messages „WATER IN CAGE" or „TOO HOT" will be displayed together with the level and the
temperature.
ATTENTION !!!
!
IT'S UP TO THE OPERATOR TO TAKE THE NECESSARY PRECAUTIONS IF THE DRAIN VALVE IS
NOT FUNCTIONAL AND THERE IS STILL HOT WATER IN THE TUB AT THE END OF THE WASH CYCLE.
ON THE DISPLAY THE ACTUAL WATER TEMPERATURE AND LEVEL WILL BE DISPLAYED.
WAIT UNTIL THE WATER IS DRAINED AND UNTIL THE WATER HAS COOLED BEFORE ALL
INTERVENTIONS AS HOT WATER CAN CAUSE BURNS.
If something goes wrong with the door lock, the program will be finished immediately.
For safety purposes, the door will stay locked.
ATTENTION !!!
!
GO TO THE CHAPTER 8 TROUBLE SHOOTING TO FIND OUT MORE ABOUT ERROR HANDLING.

6.14. HOW TO HANDLE POWER INTERUPTIONS

When a power interruption occurs while the machine is in standby mode and no program cycle was
started, the machine will stay in standby mode.
26
Out Of Order (Pr XX St YY)
Ask For Service
(D ZZZ : Fault Message)
: The Program number
: The Step number
: If it is allowed to open the door, the message Unload is displayed
: The Diagnostic or Help code
: The name of the Diagnostic message
Restart Cycle
(Power Interruption)
PROGRAMMING MANUAL
UNLOAD
516532 B PUBLICATION DATE 1 JUN 2007.DOC