Maytag MFS Series Programming Manual page 23

EDIT A WASH CYCLE
Program
Number
Prog 1
STEP 2
Step
Number
Each program step contains a Wash-Rinse part and a Drain-Spin part. (see labels at top of
the screen)
By the arrow buttons UP and DOWN, without making changes, you can scroll through the
menu items. First the Wash-Rinse menu items are shown and then the Drain-Spin menu
items.
At the menu item you want to modify, by the arrow buttons LEFT and RIGHT you can adjust
the value.
When you change the value, the value range is shown in brackets. You can only change
the value within these ranges.
Press the ENTER button to save your changes, or the ESCAPE button if you want to keep
the old setting.
Select Exit or press the ESCAPE button if you want to return to a higher menu level.
Turn the Service switch back to Run mode when you have finished.
516532 B PUBLICATION DATE 1 JUN 2007.DOC
Original STEP
Value
Wash
Wash
Time:
8.0
Menu Value
Menu Item
Item
1. Time
- the programmed time of the Wash-Rinse or Drain-Spin sequence.
- the Time to fill the tub with water is not included in the programmed time
of the Wash-Rinse sequence as the filling can be fast or very slow.
- when „time = 0" is programmed, then the corresponding sequence will
be skipped.
2. Water Temperature in Tub
- at the water fill sequence, the cold and hot water is mixed by the wash
computer to obtain the programmed wash temperature.
3. Water Level
- the wash cycle is programmed with default Water Level settings, Normal
Low and Normal High like as in the water consumption table.(see table 3.4A)
- the water consumption table shows the relation between water level and
water consumption
Info
action
Spin part
Spin
8.0 Min
[4.0-20.0]
Limits
Menu Item
PROGRAMMING MANUAL
5
Position
Menu Item
21