Wash Cycle Menu - Maytag MFS Series Programming Manual

5.3. WASH CYCLE MENU

HOW TO GET INTO THE WASH CYCLE MENU
Turn the Service Key from Run into Service - Set-up Mode.
„Main Menu" is displayed.
With the arrow DOWN button select the Wash Cycle Menu and Press ENTER button.
Cycle & Status...
Price Menu...
Wash Cycle Menu...
At the Wash Cycle Menu select the Desired Wash Cycle you want to Edit and Press ENTER button.
1 Whites...
2 Colors...
3 Bright Colors...
At the Edit Step Menu select the wash cycle step you want to Edit and Press ENTER button.
Step 1 Pre-Wash
Step 2 Wash
Step 3 Rinse
There are 5 Wash Cycle steps:
1 Pre-Wash
2 Wash
3 Rinse
4 Rinse
5 Final Rinse
If the programmed time of the Wash/Drain steps is „0" then the Wash/Drain step will be skipped.
Some functions will be activated automatically in case of the upgrade cycles, even if they are disabled at the
standard wash cycles.
20
Main Menu
Wash Cycle Menu
Program 1 Whites
PROGRAMMING MANUAL
Service Menu...
Initialization Menu...
Configuration Menu...
4 Permanent Press...
5 Quick Wash...
6 Delicates & Knits...
Prog. Menu Exit
Edit Step
Step 4 Rinse
Step 5 Final Rinse
Step Menu Exit
516532 B PUBLICATION DATE 1 JUN 2007.DOC