Maytag MFS Series Programming Manual page 43

Service Faults
View Fault Messages
Service Faults
1 Fault 1: D XXX: YYYYYYYYYYYY
2 Fault 2: D XXX: YYYYYYYYYYYY
3 Fault 3: D XXX: YYYYYYYYYYYY
4 Fault 4: DXXX: YYYYYYYYYYYY
Service Faults
Erase Fault Messages
Service Faults
View Fault Statistics
Service Statistics
1 No Drain
2 Door Switch
3 Bim/Spring
4 No Fill
516532 B PUBLICATION DATE 1 JUN 2007.DOC
• Select View Fault Messages by the ENTER Button to see the
20 Fault messages kept in memory.
• There are 20 Fault Messages kept in EEPROM memory.
• Fault N° 1 : the last occurred Diagnostic message.
Fault N° 2 : the last –1 occurred Diagnostic message.
...
Fault N° 20 : the last – 19 occurred Diagnostic message.
• D XXX : The Diagnostic message number
• YYYYYYYYYY : The Diagnostic message name
• If no messages are displayed, this means that no Errors have
occurred.
• Press the YES and ENTER button if you want to
No
erase the Fault messages.
• The Fault Statistics are an accumulation of Diagnostic
messages that have appeared over a long period.
• The Statistics can be reset at the Service Menu, by a Reset
of the Cycle counter.
• With this information, the technician has an indication of what
is in need of repair.
The List with Statistics.
0x
0x
No Drain
0x
0x Door Switch
Bimetal / Spring
No Fill
Temp Sensor
Level Sensor
Mitsubishi Alarm
PWM Drive Alarm
Mitsu. Commun. Alarm : D11
: D8
: D6 + D4 + D10 + D14
: E17
: D7
: D2
: D1
: D12 + H61 + H62 + H63
: D11 + D12
PROGRAMMING MANUAL 41