Sata And Rst Configuration; Amt Configuration - Aaeon MIX-KLUW1 Manual

TPM2.0 UEFI Spec Version [TCG_2]
Allows you to select the TCG2 spec version support.
[TCG_1_2]
[TCG_2]
Physical Presence Spec Version [1.3]
Allows you to select which TCG Physical Presence Interface Specification Version
is supported by the OS. Configuration options: [1.2] [1.3]
Device Select [Auto]
Allows you to schedule an operation for security devices. Reboot your system for
the changes to take effect. Configuration options: [Auto] [TPM 1.2] [TPM 2.0]
[Auto]
3.3.3 SATA and RST Configuration
While entering Setup, the BIOS automatically detects the presence of SATA
devices. The SATA Port items show Empty if no SATA device is installed to the
corresponding SATA port.
SATA Controller(s) [Enabled]
Allows you to enable or disable SATA devices. Configuration options: [Enabled]
[Disabled]
SATA Mode Selection [AHCI]
Allows you to set the working mode of the SATA controller. Configuration options:
[AHCI] [Intel RST Premium with Intel Optane System Acceleration]
Port 0, Port 1, Port 2 [Enabled]
These items allow you to enable/disable the SATA or M.2 port(s). Configuration
options: [Disabled] [Enabled]
Hot Plug [Disabled]
These items allow you to enable/disable SATA Hot Plug Support. Configuration
options: [Disabled] [Enabled]
3.3.4 AMT Configuration
AMT BIOS Features [Enabled]
When disabled, you are not able to access the MEBx setup. Configuration options:
[Enabled] [Disabled]
3-4
Compatible mode for Windows
Newer TCG2 protocol and event format for Windows
later.
Select this item to support both TPM 1.2 and TPM 2.0 devices
with default support of TPM 2.0 devices. If TPM 2.0 devices
are not found, TPM 1.2 devices will be enumerated.
8 / Windows 10.
® ®
10 or
®
MIX-KLUW1