User Password; Boot Menu; Boot Configuration; Boot Option Priorities - Aaeon MIX-KLUW1 Manual

Industrial motherboard
Table of Contents

Advertisement

3.5.2

User Password

If you have set a user password, you must enter the user password for accessing
the system. The User Password item on top of the screen shows the default Not
Installed. After you set a password, this item shows Installed.
To set a user password:
1.
Select the User Password item and press <Enter>.
2.
From the Create New Password box, key in a password, then press <Enter>.
3.
Confirm the password when prompted.
To change a user password:
1.
Select the User Password item and press <Enter>.
2.
From the Enter Current Password box, key in the current password, then
press <Enter>.
3.
From the Create New Password box, key in a new password, then press
<Enter>.
4.
Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user assword,
but press <Enter> when prompted to create/confirm the password. After you clear
the password, the User Password item on top of the screen shows Not Installed.
3.6

Boot menu

The Boot menu items allow you to change the system boot options.
3.6.1
Boot Configuration
Quiet Boot [Enabled]
This item enables/disables Quiet Boot. Configuration options: [Disabled] [Enabled]
Launch PXE ROM [Disabled]
This item controls the execution of UEFI and Legacy PXE OpROM. Configuration
options: [Disabled] [Enabled]
3.6.2

Boot Option Priorities

These items specify the boot device priority sequence from the available devices.
The number of device items that appears on the screen depends on the number of
devices installed in the system.
To select the boot device during system startup, press <F7> during POST.
To access Windows OS in Safe Mode, press <F8> after POST.
Chapter 3: BIOS setup
3-11

Advertisement

Table of Contents
loading

Table of Contents