Adjusting An Even Sewing Foot Stroke - DURKOPP ADLER D867 M-Type Delta Service Instructions Manual

Sewing feet

10.2 Adjusting an even sewing foot stroke

Fig. 52: Adjusting an even sewing foot stroke (1)
(1) - Walking foot
Proper setting
Presser foot (2) and walking foot (1) are raised by the same height.
Fig. 53: Adjusting an even sewing foot stroke (2)
(3) - Screw
To adjust an even sewing foot stroke:
1. Switch off the machine.
2. Disassemble the arm cover ( p. 19).
3. Set the feed dog to the level of the throat plate.
4. Loosen the screw (3).
Service Instructions M-TYPE DELTA - 00.0 - 12/2019
①
②
(2) - Presser foot
③
67