Setting The Scanner Parameters; Setting The Interface Parameters - DURKOPP ADLER D867 M-Type Delta Service Instructions Manual

Programming

19.4.24 Setting the Scanner parameters

The scanner can be activated or deactivated. A barcode scanner offers a
way to directly select a seam program.
Icon
The following types of barcodes can be read using the scanner:
The barcode types can be created with freeware software.
Important
The barcode must be composed of 3 to 32 bars. The 3-digit number of
the program (001 to 999) must be contained in the barcode.
Refer to the Appendix ( p. 225) for a few barcode examples that you
can use.
Information
The scanner also supports other types of barcodes. For a list of all sup-
ported barcodes and information on how to configure them, refer to the
 Operating Instructions of the scanner manufacturer.

19.4.25 Setting the Interface parameters

The interfaces can be used for the scanner. The parameter is active if a
scanner is connected.
It is possible to define additional settings for the interface. The possibilities
are explained in more detail in the table.
Icon
BDE
Service Instructions M-TYPE DELTA - 00.0 - 12/2019
Menu items
Scanner
• Code 128
• UCC EAN 128
• Code 39
Menu items
Mode
Baudrate
Transmission rate of the scanner
Value range
• Value range
On/Off
Value range
• Value range
Off/Scanner
• Value range
9600 - 250000
149