DURKOPP ADLER D867 M-Type Delta Service Instructions Manual page 107

Toothed belt
Fig. 87: Changing the lower toothed belt (3)
(15) - Hook tip
(16) - Toothed belt
18. Lock the machine in place ( p. 32).
19. Set the hook tip (15) to the middle of the needle.
20. Place the toothed belt (16).
21. Insert the toothed belt (16) into the next tooth of the gear wheel (17)
22. Remove the lock.
23. Place the toothed belt (16) onto the gear wheel (17) by turning the gear
24. Continue to turn the gear wheel (17) until the toothed belt (16) has
25. Erect the machine head.
Fig. 88: Changing the lower toothed belt (4)
(10) - Tensioning roller
(13) - Toothed belt
Service Instructions M-TYPE DELTA - 00.0 - 12/2019
⑮
⑯
To do so, turn the gear wheel (17).
that can be reached.
wheel (17).
been placed completely.
⑬
⑰
(17) - Gear wheel
⑩ ⑭
(14) - Screw
105