Maintenance - DURKOPP ADLER D867 M-Type Delta Service Instructions Manual

Maintenance

20 Maintenance
This chapter describes maintenance work that needs to be carried out
on a regular basis to extend the service life of the machine and achieve
the desired seam quality.
Maintenance intervals
Work to be carried out
Check the bobbins for wear and damage and replace them
if necessary
Cleaning
Removing lint and thread remnants
Lubricating
Lubricating the machine head
Lubricating the hook
Servicing the pneumatic system (optional)
Adjusting the operating pressure
Draining the water-oil mixture
Cleaning the filter element
Servicing specific components
Cleaning the thread clamp
Checking the toothed belt
Service Instructions M-TYPE DELTA - 00.0 - 12/2019
WARNING
Risk of injury from sharp parts!
Punctures and cutting possible.
Prior to any maintenance work, switch off the
machine or set the machine to threading mode.
WARNING
Risk of injury from moving parts!
Crushing possible.
Prior to any maintenance work, switch off the
machine or set the machine to threading mode.
Operating hours
8 40 160 500









191