Access The Web Interface Of The Mbnet - MB Connect Line mbNET MDH859 Quick Start Up Manual

From hw03 and fw 6.1.0
Hide thumbs Also See for mbNET MDH859:
Table of Contents

Advertisement

10 Access the web interface of the mbNET

On the web interface of the mbNET a Status page and a Diagnostic page is available.
On the Status page, five steps with additional information are displayed, which must 
be run through when connecting the mbNET with the portal.
The Diagnostic page helps you in case of a failed connection establishment in 
trobleshooting.
Requirements:
•  The configuration PC and the mbNET must be in the same IP address range.
Depending on the LAN IP that you assigned to the device in the portal, you may need to 
assign the configuration PC to the same address range.
If you assigned the mbNET e.g. the LAN IP 192.168.2.200, you need the configuration 
PC to assign the same address range (192.168.2.X). This applies to both the IP address 
and subnet mask.
•  The mbNET must be accessible via the LAN interface of the configuration PC.
Start a browser and enter the LAN IP you have assigned in the portal to the mbNET.
To log on to mbNET enter the following data:
Username: admin
Password:  The default password is located  
    on the back of the device.
- 23 -

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mbnet mdh800

Table of Contents