Jumpers And Connectors Table - Lanner LEC-3031 Series User Manual

Jumpers and Connectors Table

The Motherboard
Label Description
RJ1-2 RJ1 and RJ2 are double-stacked LAN
ports
USB1 1 x USB 2.0 Type-A port
1 x USB 3.0 Type-A port
VGA1 1 x VGA port
CN2 Power input
J3 Board-to-board connector with PCIe
signal. This connector serves as the
connection with add-on cards.
MPCIE1 mSATA mini socket
J2 SO-DIMM socket
LPC1 Low-Pin-Count for debug use only
SPIROM1 Debug use only
PWR1 2-pin jumper setting for the power
button on the panel
J1 Clear CMOS jumper
LEK-AU4 as Add-On Card for A4
Label Description
CN1 2 x 10-pin terminal block providing 4 x
RS-232/422/485
LAN1/2 2 x GbE LAN ports
J1 SATA 7-pin signal connector
J2 SATA 4-pin power connector
J5 Board-to-board connector for
connection with the motherboard
LEK-AU6 as Add-On Card for A6
Label Description
CN1-2 2x10-pin + 2x5-pin terminal block
supports 6 x RS-232/422/485
LAN1/2 2 x GbE LAN ports
J1 SATA 7-pin signal connector
J2 SATA 4-pin power connector
Industrial Communication Platform
31
Note
Note
Note