BAU – e7w Battery Level (bAu)
Use bAu mode to view the battery level of the 4 AA batteries installed in the e7w. The value is reported
as a 0-255 value, which is scaled to the 0-6.4 VDC of 4 batteries, each with 1.6-volt AA battery.
NOTE
A battery level of 4 volts or less will cause the e7w to display a low battery symbol on its display in-
dicating that the 4 AA batteries need replacement. This condition will also result in a low battery
alarm in the INNcontrol software. Refer below image
1. Enter SERVICE MODE
2. Press UP/DOWN arrow buttons to select bAu.
3. Press MODE button. This action displays bAu value, ranging from 0-255.
4. Press the FC button to return SERVICE MODE or press UP arrow button to display next
mode
Or
Press the FC button twice to exit SERVICE MODE
bAu
Voltage (VDC)
255
6.4
239
6.0
199
5.0
159
4.0
119
3.0
Table 1: Voltage table
55
INNCOM e7w THERMOSTAT USER GUIDE
31-00302-01