Honeywell INNCOM e7w User Manual page 49

Press F/C button to exit back to reG (rE6) and press F/C again to get Str (Store) on the
display.
Press FAN button to store the change. The e7w will RESET and exit Service Parameter
Mode
The e7w will RESET and exit out of Service Parameter mode
Enter Service Mode and select PA parameter.
Press MODE to view value 30
Value
Change value to 14 , press FAN to store change. e7w will
beep and return to display PA
43
INNCOM e7w THERMOSTAT USER GUIDE
Value
31-00302-01